Scale and algae in cooling system!!still make you feel annoy? CLN:Slug-X is Solution

Scale and algae in cooling system!!still make you feel annoy?

The way CLN know that as of today's To reduce the cost of maintaining equipment and extend the life of the device, but also affects the costs each year. Would be good if we can help you cost-effectively maintain system. For example at present todayCustomer experience issues of slag accumulated in the system are many and the way CLN CLN: SLUG-X offer products which qualify for the original address and descaling prevents Calc to Fin's skin, and accessories to the island. In the test system, and the results come out?You can watch a product test link as below

https://vimeo.com/190048344

Test results using cln: slug-x
for a period of three week that used our product and after use ,we survey from the physical and resulted of cooling tower water analysis. The changes are likely to come out very well.  Observed from the slag and dust that condensed together intensively at fin's before and after using the product.  Until closing washer cooling off by clearing the area to see that fin is the adhesion of slag can come off easily.

For algae has happened before and after using the product, it gradually changes color and die. And slag partially melted out was precipitated settle on the floor tray makes cleaning can easily be seen that the unique properties of slug-x which is responsible for clearing out old slag. Prevent new slag and delay the occurrence of algae in the system.  , it is recommended to regularly and consistently to maintain and protect the cooling system to operate more efficiently over time and extend the life of equipment. Save energy and money to maintenance

.  
The water quality of analytical results. It is seen that the effect is positive, it means that there is a tendency of fouling. But that is not found in the physical regeneration of the slag. All of it is based on the features and functionality of products can be seen that after using the product cln: slug-x system is put into system.

operation principle of the product runs as follows: 

1. Cln slug-x is inserted between the elements positive (+) and negative (-) to capture the element of positive (+) in order to prevent the capture of the negative (-) as well, which is charged either. Two arrested as a cause of the slag 

2. Cln slug-x products will have to make the tough, old slag is already in the system, it starts to decompose slowly peeling off layer by layer and then settling on the ground, making the tray can be removed by simple  recommendations. For systems with cooling water from the cooling tower comes supply for condenser model shell & tube recommended products ,cln slug-x constantly and consistently in order to remove the slag existing in  system, it was possible before. With its products, it serves to prevent new slag causes delay in cleaning the system, cooling tower and condenser it out longer. Thus saving energy and operating costs. 

3.main ingredients of cln product are made from plant. So, our products are non-effect human, animal and environment.